Ruhle Curing Injector IR17
SKU:
6401
CA$1.00
CA$1.00
per item
Ruhle IR17 Injector
This Ruhle IR17 machine is equipped with some interesting features, which are unique. This machine only needs 3 liters of brine to run the system, which will save a lot of costs.
As an innovative machine system, it allows for exact and uniform injection quantity, which can inject between 3% and 60% id up to 1.500kg/h meat in one cycle. There is just 2 settings needed and nearly everything works fully automatic.
Features:
- versatile rotary pump, self-priming, dry-run safe, and self-draining
- complete hose-free system inside, brine guided by stainless steel tubes
- comfortable control
- outstanding product inlet height of 280 mm
- inlet feed ramp
- standard trolly clearance
Technical Specifications:
- Machine height: 1.850 mm
- Machine length: 930 mm
- Machine width: 580 mm
- Machine weight: 250 kg
- Connected load: 220V 60Hz 3Ph
- Performance: 1.500 kg/h
- Injection rate: 23 mm
- Belt width: 250 mm
- Rows of needles: 2
- Feed inlet height: 280 mm
- Injection volume: 3 - 60 %
- Pressure: 0,5 - 4,2 bar
Ruhle Curing Injector IR17
This Ruhle IR17 machine is equipped with some interesting features, which are unique. This machine only needs 3 litres of brine to run the system. This saves a lot of costs. As an innovative machine system, the exact and uniform injection quantity, which can inject between 3% and 60%id in up to 1.500kg/h meat in one cycle, is guaranteed. Just 2 settings are needed and nearly everything works fully automatic.
Features:
Features:
- a versatile rotary pump, self-priming, dry-run safe and self-draining
- complete hose-free system inside, brine guided by stainless steel tubes
- comfortable control
- outstanding product inlet height of 280 mm
- inlet feed ramp
- standard trolley clearance
- Machine height: 1.850 mm
- Machine length: 930 mm
- Machine width: 580 mm
- Machine weight: 250 kg
- Connected load: 220V 60Hz 3Ph
- Performance: 1.500 kg/h
- Injection rate: 23 mm
- Belt width: 250 mm
- Rows of needles: 2
- Feed inlet height: 280 mm
- Injection volume: 3 - 60 %
- Pressure: 0,5 - 4,2 bar