Nock Fish Skinning Cortex CBF 496/7 Salmon Twin
SKU:
8111
CA$1.00
CA$1.00
per item
Nock Cortex CBF 496/7 Salmon Twin Automatic Fish Skinning Machine
Double Lane Conveyorized fish skinning machine comes with nock active skin gripper ASG, 2 tooth rollers (316 l), scraper comb, water cleaning unit for processing fresh fish, 2 pressure units, and a hard pressure roller for fish. This machines also comes with CF technology and universal application.
Double Lane Conveyorized fish skinning machine comes with nock active skin gripper ASG, 2 tooth rollers (316 l), scraper comb, water cleaning unit for processing fresh fish, 2 pressure units, and a hard pressure roller for fish. This machines also comes with CF technology and universal application.
Description
Features:
3 methods of skinning:
Double lane skinning machine optimized for skinning fresh and smoked salmon
Standard:
TIP: With the NOCK Cortex CBF 496/7 SALMON TWIN you achieve deeper skinning in the dark side muscle due to the standard hard pressure roller for salmon.
- This effects more pressure in the middle of the fillet and therefore a deeper skinning. The sides of the fillets are skinned less deep.
3 methods of skinning:
- Deep skinning with sharp blade
- Thin skinning (shallow skinning) with sharp blade
- Pulling-off the skin with a blunt blade (silver skinning)
Double lane skinning machine optimized for skinning fresh and smoked salmon
Standard:
- Suitable for double lane feeding, therefore has 2 separate blade holders, 2 tooth rollers, and 2 pressure units
- Tooth roller (AISI 316L) with grooves and a scraper comb (CF technology)
- NOCK ACTIVE SKIN GRIPPER (ASG) for thin skinning, allowing for no remaining skin on the fish tail
- Blade gap independently and infinitely adjustable on the right and left side
- Spring suspended blade holders for perfect skinning results
- Pressure units with pneumatic release; infinitely height adjustable
- Special hard pressure roller for salmon, made of polyamide with a long lifetime and more pressure in the middle of the fillet (less pressure at the sides of the fillets = less loss when deep skinning)
- Water cleaning unit for continuous operation when processing fresh fillets
- Infeed and discharge conveyor; can be taken out of the machine within seconds and without any tools
- NOCK POWER PLATES for the machines construction to ensure it is easy to clean, robust, and service friendly
- NOCK EASY-FLOW safety cover with pneumatic spring
- Lockable castors
- Stainless steel
- Stainless steel bearings
- Cutting width: 2x300mm
- Cutting speed: 24m/min
- Max. throughput height: 70mm
- Blade gap: 0-5mm infinitely adjustable
- Apply length on infeed conveyor: 400mm
- Infeed conveyor (1): 850x690mm
- Discharge conveyor (1): 850x690mm
- Overall dimension: 1200x1310x1860 (WxHxD)
- Weight: 360kg
- Motor performance: 0.75kW
- Voltage: 400V 50Hz 3Ph (other voltage are available)
- Water connection: G 1/4 internal thread
- Water consumption: approx. 300l/h
- Compressed air connection: 6<p<10 bar (dry)
- Compressed air consumption approx.: 30l/min (ambient pressure)
- Transfer plates, which the fillets pass through without being skinned
TIP: With the NOCK Cortex CBF 496/7 SALMON TWIN you achieve deeper skinning in the dark side muscle due to the standard hard pressure roller for salmon.
- This effects more pressure in the middle of the fillet and therefore a deeper skinning. The sides of the fillets are skinned less deep.